PS X Change V2 PSOne Boot Disc.rar Checked
PS X Change V2 PSOne Boot Disc.rar Checked >>> https://tiurll.com/2t9I2j
The first line of the Logo contains 4-byte flags for drive/disk/sector configuration. The most significant bit is set if the disk is addressed by the BIOS, and cleared if the disk is addressed by the PSX. The secondand third bit are set if the PSX is bypassing the BIOS. The fourth bit indicates whether the disk is detected by the BIOS as SCSI1 or SCSI0.The PSX only supports two drive/disk/sector configurations: SCSI0 and SCSI1.The Flags byte is set by the BIOS to the following values:- 000 = SCSI0 drive/disk/sector- 001 = SCSI1 drive/disk/sector- 100 = Both drive/disk/sector- 101 = Both drive/disk/sector, but disk is SCSI1- 110 = Both drive/disk/sector, but disk is SCSI0- 111 = BIOS uses disk/sector 0 for booting (which usually is the second drive /disk/sector)- 000 = SCSI0 drive/disk/sector, and PSX is starting from drive/sector 1 (disk/sector 0 is for booting)- 001 = SCSI0 drive/disk/sector, and PSX is starting from drive/sector 0 (disk/sector 0 is for booting)- 010 = SCSI1 drive/disk/sector, and PSX is starting from drive/sector 1 (disk/sector 0 is for booting)- 011 = SCSI1 drive/disk/sector, and PSX is starting from drive/sector 0 (disk/sector 0 is for booting) 827ec27edc